Samsung SCX-5312F User Manual (ENGLISH) - Page 117
Menu/Exit, System Setup, Enter, Mode/Enter, Stop/Clear, Start, Printers, Properties
View all Samsung SCX-5312F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Condition When printing using the USB connection, an error occurs repeatedly. Printing is too slow. Probable cause Suggested solutions When the USB mode is set to "FAST" some PC users may experience poor USB communication. Change the USB mode to "SLOW." To do so, take the following steps: 1. Press Menu/Exit then System Setup from the onetouch dial keypad. SCX-5112 users should press Menu then Enter. 2. Use or until "USB MODE" appears on the top line of the display. The current setting appears on the bottom line. 3. Press or to select "SLOW." 4. Press Mode/Enter (Enter on SCX-5112) to save the selection. 5. Press Stop/Clear to return to Standby mode. The computer parallel port may not be set for high speed communications. If your computer is equipped with an ECP parallel port, enable this mode of operation. Refer to the Enabling High Speed Printer Communications section and your PC's user guide. If using Windows 95, the spool setting may be set incorrectly. Point to the Start and then click Settings then Printers. Click your product icon with the right mouse button. Click Properties and then spool settings on the Details tab. Select the desired setting from the available choices. Computer may not have enough memory (RAM). Install more RAM in your computer. The print job is large. Reduce resolution from 600 dpi to 300 dpi. 8.16 TROUBLESHOOTING