Samsung SL-M2875FW User Manual Ver.1.03 (English) - Page 212

System setup Item Wakeup Event System Timeout Job Timeout Altitude Adj. Description You can set the condition to wake up from power-save mode. • On: The machine wake up from the power save mode on the following cases: - Pressing any button - Opening or closing the paper tray - Inserting paper in the document feeder • Off: The machine wake up from the power save mode only when the (Power/Wakeup) button is pressed. Sets the time that the machine remembers previously used copy settings. After the timeout, the machine restores the default copy settings. Sets the length of time the printer waits before printing the last page of a print job that does not end with a command to print the page. Optimize print quality according to the machine's altitude. Item Auto Continue Paper Substit. Toner Save Description Determine whether or not the machine continues printing when it detects the paper does not match the paper settings. • 0 Sec: This option allows you to continue printing when the paper size you have set is mismatched with the paper in the tray. • 30 Sec: If a paper mismatch occurs, an error message will display. The machine waits for about 30 second, then automatically clear the message and continue printing. • Off: If a paper mismatch occurs, the machine waits until you insert the correct paper. Automatically substitutes the printer driver's paper size to prevent the paper mismatch between Letter and A4. For example, if you have A4 paper in the tray but you set the paper size to Letter in the printer driver, the machine prints on A4 paper and vice versa. Activating this mode extends the life of your toner cartridge and reduces your cost per page beyond what one would experience in the normal mode, but it reduces print quality. 3. Useful Setting Menus 74