Sharp DT 400 DT-400 Operation Manual - Page 14
Quick Start
UPC - 074000364332
View all Sharp DT 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Quick Start This section shows the basic operation. For details, see the page described below for each step. Setup and Projection Connection of the projector and the video equipment with an S-video terminal is explained as an example below. 3 ON button 8 STNADBY button 8 STNADBY button 3 ON button 6 ZOOM/FOCUS button 7 KEYSTONE button 6 Adjustment buttons ('/"/\/|) 4 INPUT button 6, 7 Adjustment buttons ('/"/\/|) 6 ZOOM/FOCUS button 4 INPUT buttons, DIGITAL INPUT button 6 HEIGHT ADJUST button 1. Place the projector facing a screen Page 16 2. Connect the projector to the video equipment and plug the power cord into the AC socket of the projector Connect the audio output terminal of the video equipment to the audio input terminal of the audio equipment using an audio cable. Pages 21-27 3. Remove the lens cap and turn the projector on On the projector On the remote control Page 27 -14