Sharp DT 400 DT-400 Operation Manual - Page 50
Auto Power Off Function, Selecting the Menu Screen, Position
![]() |
UPC - 074000364332
View all Sharp DT 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Using the "Options" Menu Auto Power Off Function Menu operation Page 40 Example: "Options" menu screen for INPUT 1 mode Selecting the Menu Screen Position This function allows you to select the desired position of the menu screen. Menu operation Page 40 Example: "Options" menu screen for INPUT 1 mode Description of Auto Power Off Selectable items Description The projector automatically enters the (ON) standby mode when no input signal is detected for 15 minutes or longer. (OFF) The Auto Power Off function will be disabled. Note • When the Auto Power Off function is set to " " (ON), 5 minutes before the projector enters the standby mode, the message "Enter STANDBY mode in X min." will appear on the screen to indicate the remaining minutes. Description of Menu Positions Selectable items Center Upper Right Lower Right Upper Left Lower Left Description Displayed on the center of the image. Displayed on the upper right of the image. Displayed on the lower right of the image. Displayed on the upper left of the image. Displayed on the lower left of the image. Position of the Menu Screen which Is Displayed on the Screen Upper Left Center Upper Right Lower Left Menu screen Lower Right Screen -50
![](/manual_guide/products/sharp-dt-400-dt400-operation-manual-63c4da1/50.png)