Sharp DT 400 DT-400 Operation Manual - Page 44

Picture Adjustment ("Picture" menu) Picture Mode Function This function stores all items set in "Picture". Five settings can be stored separately in "Memory 1" to "Memory 5". Each stored setting is reassigned to each input mode (INPUT 1 to INPUT 5). Even when the input mode or signal is changed, you can easily select optimal settings from the stored settings. Menu operation Page 40 Example: "Picture" menu screen for INPUT 1 mode Switching the High Brightness/High Contrast Mode This function changes the brightness and contrast of the projected image. It can be operated using the IRIS button on the remote control. Menu operation Page 40 Example: "Picture" menu screen for INPUT 1 mode Select "Picture Mode" on the "Picture" menu and the memory location where you want to store the settings. Then adjust the setting items on the "Picture" menu. Picture Mode Description Memory Settings of all items in "Picture" can be stored 1-5 for the respective input modes. The stored settings (Memory 1 to 5) can be selected in any input modes. Memory Besides "Memory 1" to "Memory 5", other OFF settings on the "Picture" menu can be stored for each input mode. The settings stored in "Memory OFF" cannot be applied when another input mode is selected. If you want to apply the stored settings on the "Pic- ture" menu, select input mode and then press , or select "Picture Mode" in the "Picture" menu. If you want to change the stored settings, select the memory location for those settings and make settings on the "Picture" menu. -44 Description of IRIS Settings Selectable items Description High Brightness High brightness is given priority over high contrast. High Contrast High contrast is given priority over high brightness.