Sharp DT 400 DT-400 Operation Manual - Page 48
Setting the Video System, Signal Type Setting
![]() |
UPC - 074000364332
View all Sharp DT 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Using the "Options" Menu Setting the Video System The video input system mode is factory preset to "Auto"; however, a clear picture from the connected audio-visual equipment may not be received, depending on the video signal difference. In that case, switch the video signal. Menu operation Page 40 Example: "Options" menu screen for INPUT 4 mode Signal Type Setting This function allows you to select the input signal type RGB or Component for INPUT 5. Menu operation Page 40 Example: "Options" menu screen for INPUT 5 (RGB) mode Description of Video Systems Selectable items Description When connected to PAL video equip- PAL ment. NTSC3.58 When connected to NTSC video equipment. SECAM When connected to SECAM video equipment. NTSC4.43 When reproducing NTSC signals in PAL video equipment. Description of Signal Type Settings Selectable items Description RGB Set when RGB signals are received. Component Set when Component signals are received. Note • You can also select "Signal Type" using on the remote control (only INPUT 5). Note • The video signal can only be set in INPUT 3, INPUT 4 mode. • "Auto" cannot be set for PAL-M and PAL-N input signals. Select "PAL-M" or "PAL-N" in "Video System" menu for PAL-M and PAL-N input signals. -48
![](/manual_guide/products/sharp-dt-400-dt400-operation-manual-63c4da1/48.png)