Sharp DT 400 DT-400 Operation Manual - Page 42
Picture Adjustment Picture menu
UPC - 074000364332
View all Sharp DT 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Picture Adjustment ("Picture" menu) You can adjust the projector's picture to your preferences using the "Picture" menu. Adjusting the Image Menu operation Page 38 Note • First select "Memory 1-5" or "Memory OFF" when you want to save the "Picture" menu settings. See page 44 for details. Example: "Picture" menu screen for INPUT 1 mode Adjusting the Color Temperature This function allows for selecting the desired color temperature. With the lower value selected, the projected image becomes warmer, reddish and incandescent-like while with the higher value, the image becomes cooler, bluish and fluorescent-like. Menu operation Page 40 Example: "Picture" menu screen for INPUT 1 mode Description of Adjustment Items Selectable items Press \ Press | Contrast For less contrast For more contrast Bright For less brightness For more brightness Color For less color intensity For more color intensity Tint For making skin tones purplish For making skin tones greenish Sharp For less sharpness For more sharpness Red For weaker red For stronger red Blue For weaker blue For stronger blue Note • "Color", "Tint" and "Sharp" do not appear for RGB input in INPUT 5 mode. • To reset all adjustment items, select "Reset" on the "Picture" menu screen and press . • "Tint" cannot be used with PAL, SECAM, PALM, PAL-N or PAL-60. • "Color", "Tint" and "Sharp" cannot be used in the DIGITAL mode. -42 Description of Color Temperature Settings CLR Temp Description 5500K The less the value is set to, the warmer, 6500K reddish, incandescent-like the image becomes. 7500K 8500K 9300K The more the value is set to, the cooler, 10500K bluish, fluorescent-like the image becomes. "CLR Temp" is fine adjusted by following the procedure below. 1 Select "CLR Temp" in the "Picture" menu on the menu screen and press . • A single menu bar of "CLR Temp" is displayed. 2 Press ' or " to fine adjust the color temperature. • With the lower value selected, the projected image becomes magenta-tinged. With the higher value selected, the projected image becomes green-tinged. • Pressing \ or | changes the value of the color temperature in the sub menu. Note • Values on "CLR Temp" are only for general standard purposes.