Sharp DT 400 DT-400 Operation Manual - Page 61
Troubleshooting, Service Information For the U.S.
UPC - 074000364332
View all Sharp DT 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Troubleshooting Problem No picture Color is faded or poor. Check • Projector power cord is not plugged into the wall outlet. • Power to the external connected devices is off. • The selected input mode is wrong. • Cables are incorrectly connected to the rear panel of the projector. • External output has not been set when connecting notebook computer. • "Contrast" and "Bright" are set to minimum position. • Image adjustments are incorrectly set. (Video Input only) • Video input system is incorrectly set. (INPUT 5) • Input signal type (RGB/Component) is incorrectly set. Page 27 - 29 19-26 - 42 42 48 48 On-screen display does • "OSD Display" is set to " (OFF)". 47 not appear. • Adjust the focus. 30 • The projection distance exceeds the focus range. 17 (Computer Input only) • Perform "Fine Sync" Adjustments. ("Clock" Adjustment) 45 • Perform "Fine Sync" Adjustments. ("Phase" Adjustment) 45 Picture is blurred; • Noise may appear depending on the computer. - noise appears. An unusual sound is • If the picture is normal, the sound is due to cabinet shrinkage - occasionally heard caused by room temperature changes. This will not affect from the cabinet. operation or performance. Maintenance • See "Maintenance Indicators". 54 indicator illuminates or blinks in red. The cooling fan • When temperature inside the projector increases, the cooling - becomes noisy. fan runs faster. The lamp takes a long • The lamp will eventually need to be changed. 57 time to turn on. The lamp has reached the end of its life. Replace the lamp. Picture is dark. Image is green on • Change the input signal type. 48 INPUT 5 Component. Image is pink (no green) on INPUT 5 RGB. This projector is equipped with a microprocessor. Its performance could be adversely affected by incorrect operation or interference. If this should happen, unplug the Unit and plug it in again after more than 5 minutes. Service Information (For the U.S.) For the location of the nearest Sharp Authorized Service Center, or to obtain product literature, accessories, supplies or customer assistance, please call 1-800-BE-SHARP (1-800-2374277) or visit SHARP's website (http://www.sharpusa.com). -61 Appendix