Sharp DT 400 DT-400 Operation Manual - Page 18
Projection from behind the Screen, Projection Using a Mirror, Ceiling-mount Setup
![]() |
UPC - 074000364332
View all Sharp DT 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Setting Up the Projector Projecting a Reversed Image Projection from behind the Screen ■ Place a translucent screen between the projector and the audience. ■ Reverse the image by setting "Rear" in the "PRJ Mode" menu. (See page 52.) Translucent screen Audience Projection Using a Mirror ■ Place a mirror (normal flat type) in front of the lens. ■ When the translucent screen is placed between the mirror and audience, set to "Front" in the "PRJ Mode" menu. (See page 52.) ■ When the mirror is placed on the audience side, set to "Rear" in the "PRJ Mode" menu. (See page 52.) Set to "Front" Set to "Rear" Mirror Audience Translucent screen Audience Mirror Info • When using a mirror, ensure to carefully position both the projector and the mirror so the light does not shine into the eyes of the audience. Ceiling-mount Setup ■ It is recommended that you use the optional Sharp ceiling-mount bracket for this installation. ■ Before mounting the projector, contact your nearest Sharp Authorized Service Center or Dealer to obtain the recommended ceiling-mount bracket (commercially available). (AN-CM270 ceiling-mount bracket, AN-EP101B extension tube for AN-CM270.) ■ Invert the image by setting "Ceiling + Front" in "PRJ Mode". See page 52 for use of this function. -18
![](/manual_guide/products/sharp-dt-400-dt400-operation-manual-63c4da1/18.png)