Sharp DT 400 DT-400 Operation Manual - Page 46
Auto Sync Adjustment, Checking the Input Signal
UPC - 074000364332
View all Sharp DT 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Computer Image Adjustment ("Fine Sync" menu) Auto Sync Adjustment Select whether the image is to be synchronized automatically when switching the signal with "ON" or "OFF". Menu operation Page 40 Example: "Fine Sync" menu screen for INPUT 5 (RGB) mode Checking the Input Signal This function allows you to check the current input signal information. Menu operation Page 40 Example: "Fine Sync" menu screen for INPUT 5 (RGB) mode Description of Auto Sync Adjustment Selectable items Description (ON) Auto Sync adjustment will occur when the projector is turned on or when the input signals are switched, when connected to a computer. (OFF) Auto Sync adjustment is not automatically performed. Note • Auto Sync adjustment is also performed by pressing on the remote control. • The Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector. • When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. (See page 45.) • "Auto Sync" cannot be used in the DIGITAL mode. Note • 540P is displayed on the screen when signal 1080I is inputted during DVI connection. -46