Sharp DT 400 DT-400 Operation Manual - Page 16
Setting Up the Projector
![]() |
UPC - 074000364332
View all Sharp DT 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Setting Up the Projector Setting Up the Projector Position the projector perpendicular to the screen to achieve an optimal image. Note • The projector lens should be centered in the middle of the screen. If the horizontal line passing through the lens center is not perpendicular to the screen, the image will be distorted, making viewing difficult. • For an optimal image, position the screen so that it is not in direct sunlight or room light. Light falling directly on the screen washes out the colors, making viewing difficult. Close the curtains and dim the lights when setting up the projector in a sunny or bright room. Standard Setup (Front Projection) ■ Place the projector at the required distance from the screen according to the desired picture size. (See page 17.) Indication of the Projection Image Size and Projection Distance See "Screen Size and Projection Distance" on page 17 for details. Example : When using a wide screen (16:9) Picture Size 200" 150" 100" 80" 60" 174" × 98" 131" × 74" 70" 87" × × 39" 49" 52" × 29" PDCrioestjneatcnetcrioen 5' 1("1-.5576m''89"-(2"2.-0.3815m80m''-7)4("2"3.-.61251m1m22')-'(113131."9."955-mm1-)95' 6.9"5m)17'(45".2-9m26-' 07".95m) -16
![](/manual_guide/products/sharp-dt-400-dt400-operation-manual-63c4da1/16.png)