Sharp DT 400 DT-400 Operation Manual - Page 26
Plug and Play function
UPC - 074000364332
View all Sharp DT 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Connecting to a Computer When connecting a computer, ensure that it is the last device to be turned on after all the connections are made. Connecting to a computer with DIGITAL RGB output Terminal (DIGITAL) • Before connecting the cable, switch the digital input type switch to "PC". Computer INPUT 5 terminal 1 Switch to "PC" DVI output terminal 2 DVI cable (sold separately: AN-C3DV) 3 Note • Select DIGITAL mode when connecting to digital output terminal of the computer. (See page 29.) • Before switching "Digital input type switch" and connecting, ensure to unplug the power cord of the pro- jector from the AC outlet and turn off the computer to be connected. After making all connections, turn on the projector and then the computer. "Plug and Play" function ■ This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC com- patible computer will communicate their setting requirements, allowing for quick and easy setup. ■ Before using the "Plug and Play" function, ensure to turn on the projector first and the connected computer last. Note • The DDC "Plug and Play" function of this projector operates only when used in conjunction with a VESA DDC compatible computer. -26