Sharp PG-LS2000 PG-LX2000 PG-LS2000 Operation Manual - Page 17
Adjust the projected image with the Setup Guide, Correct trapezoidal distortion, Select the Input mode
View all Sharp PG-LS2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
4. Adjust the projected image with the Setup Guide 1 After the projector turns on, the Setup Guide appears. (When "Setup Guide" is set to "On". See page 45.) 2 Follow the steps in the Setup Guide and adjust the focus, height (angle) and picture size. 3 After adjusting the focus, height (angle) and picture size, press ENTER to finish the Setup Guide. BP. 24 5. Correct trapezoidal distortion Correcting trapezoidal distortion using Keystone Correction. On the remote control Shrinks upper side. Shrinks lower side. Easy Start BP. 26 6. Select the Input mode Press INPUT P/R to display the INPUT list. Use INPUT P/R to select the Input mode. On the On the remote projector control INPUT list (e.g. PG-LX2000) INPUT Audio COMPUTER H HDMI V VIDEO [PG-LX2000 only] When you select HDMI input, use O/Q to select the audio input terminal (HDMI or AUDIO). BP. 27 7. Turn the computer on 8. Turn the power off Press STANDBY/ON on the projector or STANDBY on the remote control, and then press the button again while the confirmation message is displayed to put the projector into Standby mode. On the On the remote projector control On-screen display BP. 23 15