Sharp PG-LS2000 PG-LX2000 PG-LS2000 Operation Manual - Page 48
Adjusting the Projector Function (“PRJ-ADJ1/2” Menu), Auto Sync (Auto Sync Adjustment)
View all Sharp PG-LS2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Adjusting the Projector Function ("PRJ-ADJ1/2" Menu) Q PRJ-ADJ1 Pict. SIG 1 Auto Sync 2 Auto Power Off 3 Auto Restart 4 Speaker 5 Fan Mode 6 System Lock 7 Keylock SCR PRJ-ADJ1 PRJ2 On On On On Normal Disable Off Q PRJ-ADJ2 Pict. SIG 8 Quick Start Menu Menu operation n Page 36 SCR PRJ1 PRJ-ADJ2 On 9 FUNCTION Button 0 STANDBY Mode Input Search Quick Start DLP® Link TM Off DLP® Link TM Invert All Reset SEL./ADJ. ENTER END Lamp Timer(Life) SEL./ADJ. 0h ENTER 0 min 100% END 1 Auto Sync (Auto Sync Adjustment) Selectable items Description On Auto Sync adjustment will occur when the projector is turned on or when the input signals are switched, when connected to a computer. Off Auto Sync adjustment is not automatically performed. Note • Auto Sync adjustment is also performed by pressing AUTO SYNC. • The Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector. • When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. (See page 41.) 2 Auto Power Off Function Selectable items Description On When no input signal is detected for more than 15 minutes, the projector will automatically enter Standby mode. Off The Auto Power Off function will be disabled. Note • When the Auto Power Off function is set to "On", 5 minutes before the projector enters Standby mode, the message "Enter STANDBY mode in X min." will appear on the screen to indicate the remaining minutes. 46 3 Auto Restart Function Selectable items Description On If the power cord is unplugged from the outlet or the breaker switch is turned off when the projector is on, then the projector automatically turns on when the power cord is plugged into the AC outlet or the breaker switch is turned on. Off The projector does not turn on automatically when the power cord is plugged into the AC outlet or the breaker switch is turned on. 4 Speaker Setting Selectable items Description On The audio signal is output from the internal speaker. Off The audio signal is not output from the internal speaker. 5 Fan Mode Setting This function changes the fan rotation speed. Selectable items Description Normal Suitable for normal environments. High Set when using the projector at altitudes of approximately 1,500 meters (4,900 feet) or more. When "Fan Mode" is set to "High", the fan rotation speeds up, and the fan noise becomes louder.