Sharp PG-LS2000 PG-LX2000 PG-LS2000 Operation Manual - Page 23
Connecting the Power Cord
View all Sharp PG-LS2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Connections Equipment Audio equipment Terminal on connected equipment Cable ø3.5 mm ø3.5 mm stereo minijack to RCA audio cable audio output (commercially available) terminal Terminal on the projector AUDIO RCA audio output terminal RCA audio cable (commercially available) Audio output terminal Cables for a camera or a video game HDMI output HDMI cable (commercially available) terminal HDMI is only for PG-LX2000 Note • You can select HDMI or AUDIO in the INPUT list. (See page 27.) This projector is able to process the following signals when connected to HDMI equipment: • Video signal: For details, see "Digital Support" in the list of "Compatibility Chart" on page 64. • Audio signal: Linear PCM audio • Sampling frequency: 48kHz/44.1kHz/32kHz Connecting the Power Cord Plug the supplied power cord into the AC socket on the rear of the projector. Then plug into AC outlet. Power cord (supplied) AC socket To AC outlet 21