Sharp PG-LS2000 PG-LX2000 PG-LS2000 Operation Manual - Page 40

Picture Adjustment ("Picture" Menu) Menu operation n Page 36 Q PAGE1 Picture SIG 1 Picture Mode Contrast Bright Color 2 Tint Sharp Red Blue SCR PRJ1 PRJ2 Standard 0 0 0 0 0 0 0 Q PAGE2 Picture SIG Picture Mode SCR PRJ1 PRJ2 Standard 3 CLR Temp 2 BrilliantColorTM 4 C.M.S. Setting C.M.S. 5 Film Mode 6 DNR 7 Eco+Quiet Reset 0 1 On Auto Level 2 Off SEL./ADJ. ENTER END SEL./ADJ. ENTER END 1 Selecting the Picture Mode Selectable items Description Standard For standard image Presentation Brightens portions of image for more enhanced presentations. Movie Gives natural tint to the projected image. Game Gives sharpness to the projected image. *sRGB For high fidelity reproduction of images from a computer. The default settings of each item when selecting Picture Mode CLR Temp BrilliantColorTM Eco+Quiet 0 1 Off 0 2 Off -1 0 On 0 1 Off - - Off • "sRGB" is displayed only when RGB signal is input. • You can set or adjust each item in the "Picture" menu to your preference. Any changes you make are retained in memory. Note • You can also press PICTURE MODE on the remote control to select the Picture mode. (See page 31.) • *sRGB is an international standard of color reproduction regulated by the IEC (International Electrotechnical Commission). As the fixed color area has been decided by the IEC, the images are displayed in a natural tint based on an original image, when "sRGB" is selected. You cannot set the items, "Red", "Blue", "CLR Temp", "BrilliantColorTM" and "C.M.S.", when "sRGB" is selected. Info • When "sRGB" is selected, the projected image may become dark, but this does not indicate a malfunction. 38