Sharp PG-LS2000 PG-LX2000 PG-LS2000 Operation Manual - Page 28
Correcting Trapezoidal Distortion, Correcting Trapezoidal, Distortion
View all Sharp PG-LS2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Image Projection (Continued) Correcting Trapezoidal Distortion When the image is projected either from the top or from the bottom towards the screen at an angle, the image becomes distorted trapezoidally. The function for correcting trapezoidal distortion is called Keystone Correction. Adjustment buttons (P/R/O/Q) Note • The Keystone Correction can be adjusted up to an angle of approximately ±40 (PG-LX2000)/ ±20 (PG-LS2000) degrees and the screen can also be set up to an angle of approximately ±40 (PG-LX2000)/±20 (PG-LS2000) degrees (When the Resize mode is set to "NORMAL" (see page 28)). 1 Press KEYSTONE to enter the Keystone Correction mode. RETURN button KEYSTONE button On-screen display (Keystone Correction mode) KEYSTONE 0 ADJUST END Shrinks upper side. (Move the slide bar in the + direction.) 2 Press P/Q or O/R to adjust the Keystone Correction. Note • To return to the default setting, press RETURN while the on-screen display of the Keystone Correction mode is on the screen. 3 Press KEYSTONE. • The on-screen display of the Keystone Correction mode will disappear. Shrinks lower side. (Move the slide bar in the - direction.) Info • While adjusting the image using Keystone Correction, straight lines and the edges of the image may appear jagged. 26