Sharp PG-LS2000 PG-LX2000 PG-LS2000 Operation Manual - Page 44
Setting the Video System, Checking the Input Signal
View all Sharp PG-LS2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Signal Adjustment ("SIG-ADJ" Menu) (Continued) Menu operation n Page 36 5 Setting the Video System 6 Setting the Video Setup The video input system mode is factory preset to "Auto"; however, a clear picture from the connected audio-visual equipment may not be received, depending on the Video signal difference. In that case, switch the Video signal. Selectable items Auto PAL SECAM *NTSC4.43 NTSC3.58 PAL-M PAL-N PAL-60 * When reproducing NTSC signals in PAL video equipment. Selectable items 0 IRE 7.5 IRE Description Sets the black level to 0 IRE. Sets the black level to 7.5 IRE. Note • This function is available for the following signals. With COMPUTER/COMPONENT input: - 480I With VIDEO input: - NTSC3.58 7 Checking the Input Signal This function allows you to check the current input signal information. Note • The Video signal can only be set in VIDEO mode. • When "Video System" is set to "Auto", you may not receive a clear picture due to signal differences. Should this occur, switch to the video system of the source signal. 42