Sharp PG-M25X PGM25X Operation Manual - Page 107
Enter the remaining 3 digits in, the same way as above and, press, Re-enter the same key code in,
View all Sharp PG-M25X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
2 Enter the remaining 3 digits in the same way as above and press . 3 Re-enter the same key code in Reconfirm and press . Note • The Keylock function will become temporarily disabled. When "Anti-Theft" is set, the keycode inputting section appears after the power is turned on. At that time, enter the right keycode. • Press the buttons on the remote control if the buttons on the remote control are used for setting the keycode. In the same manner, press the buttons on the projector if the buttons on the projector are used for setting the keycode. Info • Once the function is activated, you must remember the correct keycode. We suggest you record the keycode in a safe place where only authorized users will have access. If you lose or forget your keycode, you will need to contact your nearest Sharp Authorized Projector Dealer or Service Center (see page 118). You may need to bring your projector to them to restore the projector to original factory condition (password and keycode reset). • If the Anti-theft function is set and you loose the GyroRemote, you will not be able to release the Anti-theft function. In case you loose the GyroRemote, contact your nearest repair center. Easy to Use Functions PG-M25X#E#p97_106.p65 103 02.4.29, 3:24 PM -103