Sharp PG-M25X PGM25X Operation Manual - Page 26
Setup
View all Sharp PG-M25X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Setup Using the Adjustment Feet The height of the projector can be adjusted using the adjustment feet when the surface of the projector is placed on is uneven or when the screen is slanted. The projection of the image can be made higher by adjusting the projector when it is in a location lower than the screen. 1 Press the foot releases. 2 Lift the projector to adjust its height and remove your hands from the foot releases. 3 Rotate the adjustment feet to make minor changes. Note • When returning the projector to its origi- nal position, hold the projector firmly, press the foot releases and then lower it. • The projector is adjustable up to approximately 5.5 degrees from the standard position. Info • Do not press the foot releases when the feet are extended without firmly holding the projector. • Do not hold the lens when lifting or lowering the projector. • When lowering the projector, be careful not to get your fingers caught in the area between the adjustment feet and the projector. -22 PG-M25X#E#p21_32.p65 22 Foot releases Adjustment feet Up Down 02.4.29, 3:09 PM