Sharp PG-M25X PGM25X Operation Manual - Page 67
Checking the Input Signal, Auto Sync Adjustment
View all Sharp PG-M25X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Checking the Input Signal This function allows you to check the current input signal information. Select "Signal Info" in the "Fine Sync" menu on the menu screen. ➝ For operating the menu screen, see pages 50 and 52. ➝ For operating the menu screen using the GyroRemote see pages 54 and 55. Note • The projector will display the number of scanned lines available input from audiovisual equipment such as a DVD player or Digital Video. Auto Sync Adjustment Used to automatically adjust a computer image. Select "Auto Sync" in the "Fine Sync" menu on the menu screen. ➝ For operating the menu screen, see pages 50 and 52. ➝ For operating the menu screen using the GyroRemote see pages 54 and 55. Note When setting to " Normal" or " High Speed": • Auto Sync adjustment will occur when the projector is turned on or when the inputs are switched, when connected to a computer. Manual adjustments should be performed: • When the optimum image cannot be achieved with Auto Sync adjustment. See page 61. • Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector. • When making adjustments using the AUTO SYNC button on the projector. • When setting "Auto Sync" to "OFF" or "High Speed", and if is pressed Auto Sync will be executed in "High Speed" mode. If the button is pressed again within one minute, Auto Sync will be executed in "Normal" mode. • Adjustments can also be made by selecting "Auto Sync" using the Button Assign function. PG-M25X#E#p50_64.p65 63 Screen display during Auto Sync 02.4.29, 3:16 PM -63 Basic Operation