Sharp PG-M25X PGM25X Operation Manual - Page 27
Example of Standard Setup
View all Sharp PG-M25X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Setup and Connections Setting up the Screen Position the projector perpendicular to the screen with all feet flat and level to achieve an optimal image. Note • The projector lens should be centered in the middle of the screen. If the horizontal line passing through the lens center is not perpendicular to the screen, the image will be distorted, making viewing difficult. • For optimal image, position the screen so that it is not in direct sunlight or room light. Light falling directly on the screen washes out the colors, making viewing difficult. Close the curtains and dim the lights when setting up the screen in a sunny or bright room. • A polarizing screen cannot be used with this projector. Standard Setup (Front Projection) ■ Place the projector at the required distance from the screen according to the desired picture size. (See page 24.) Side View 90° Top View 90° Example of Standard Setup • The distance from the screen to the projec- tor may vary depending on the size of the screen. P.24 • The default setting can be used, when plac- ing the projector in front of the screen. If the Audience projected image is reversed or inverted, re- adjust the setting to "Front" in "PRJ Mode". P.98 • Place the projector so that an imaginary horizontal line that passes through the center of the lens is perpendicular to the screen. PG-M25X#E#p21_32.p65 23 02.4.29, 3:09 PM -23