Sony CCD-FX520 Primary User Manual - Page 20
Maintenance, Information, Precautions, Reattach, Eyecup, Removing, Inside, Viewfinder, Camcorder,
View all Sony CCD-FX520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Maintenance Information and Precautions 1000111 .0°4411.107 .4:-;. .:' To ensure dear pictures. clean the video heads periodically. when playbeck SCUM ate 'noier, or hardy visible, the erase heads may be contaminated. tat [b] (at Slight contamination [b] Critical conterninagon it toms happens. dean the video heads weer the Sony V8-25CLH cleaning CaSeette (cot Supplied) After checking the parse. 0 it is all -noisy-. repeat the cleaning. (Do net repeat cleaning more than 5 times.) Caution Do not use a cammercialy available wet-ype damning canons. It may damage den video heads. Note II the V8-25CLH cleaning cassette is not available in your area consult your Sony serviCelaCirdy. Removing Dust from Inside the Viewfinder 1) While boding down the switch on the viewfinder barrel, turn the eyecup in the direction of the arrow and pull 0 up to detach it. (2) Remove the small lens from inscle of the viewfinder. (3l Clean the surface of the screen wit a commercially available blower. 2 3 3 tlo To Reattach the Eyecup (t) Replace the small lens inside the viewfinder. (2) Align the groove on the eyecup with the • mark on the barrel (3) Turn the eyecup clockwise 2 3 «l Precautions C Camcorder Operation • Operate the camcorder on 6.0 V (battery pad° or 7.5 V (AC power • For DC or AC operation. use the accessories recommended in Mrs manual. • Should any sold obiect or liquid fall into the casing. disconnect the plug of the camcorder and have d checked by qualified personnel before operating it any further • Do not hold the camcorder by the .newlinder.[e] • Avoid rough handling or mechanical shock. Be particularly careful of the tens. • Keep the lens cap on the lens when not using the camera. • Do not wrap up the camcorder and operate it since heat may build up internally. • Keep the camcorder away from strong magnetic fields or mechanical vibration • Da not let sand get into the camcorder. When you use the camcorder on a sandy beach or dusty place. protect it tram the sand or dust. Sand or dust may cause the unit to malfunction end a sometimes the malfunction cannot be repeired.[0] . Do not let the camcorder get wet. Keep the camcorder from rein or sea water. It may cause a malfunction and sometimes the malfunction cannot be repeiret[c] [a] [el 38 39 3