Sony DCR-HC26 Operating Guide - Page 50
Dubbing to VCR/DVD device, etc. Continued, When dubbing is complete, stop - power supply
UPC - 027242688711
View all Sony DCR-HC26 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Dubbing to VCR/DVD device, etc. (Continued) 1 Prepare your camcorder for playback. Insert the recorded cassette. Slide the POWER switch repeatedly to turn on the PLAY/EDIT lamp. 2 Prepare your VCR/DVD device for recording. When dubbing to the VCR, insert a cassette for recording. When dubbing to the DVD recorder, insert a DVD for recording. If your recording device has an input selector, set it to the appropriate input (such as video input1, video input2). 3 Connect your VCR/DVD device to your camcorder as a recording device. Connect your camcorder to the input jacks of a VCR or a DVD device. 4 Start playback on the camcorder, and recording on the VCR/DVD device. Refer to the operating instructions supplied with your recording device for details. 5 When dubbing is complete, stop your camcorder and the VCR/DVD device. • The following cannot be output via the DV Interface (i.LINK): - Indicators - Pictures edited using [P EFFECT] (p. 42) • When connected using an i.LINK cable, the recorded picture becomes rough when a picture is paused on your camcorder while recording to a VCR. • When connected using an i.LINK cable, data code (date/time/camera settings data) may not be displayed or recorded depending on the device or application. • To record the date/time and camera settings data when connected by the A/V connecting cable, display them on the screen (p. 39, 48). 50