Sony DCR-HC26 Operating Guide - Page 71
Dubbing/Editing/Connecting to other devices, Connecting to a computer, You cannot use [WHT BAL]. - original cd
UPC - 027242688711
View all Sony DCR-HC26 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
You cannot use [EXPOSURE]. • You cannot use [EXPOSURE] together with NightShot plus. • If you set [PROGRAM AE], [EXPOSURE] is automatically set to [ AUTO]. You cannot use [WHT BAL]. • You cannot use [WHT BAL] together with NightShot plus. You cannot use [PROGRAM AE]. • You cannot use [PROGRAM AE] together with NightShot plus. Dubbing/Editing/Connecting to other devices Time code and other information appear on the display of the connected device. • Set [DISP OUT] to [LCD] while connected with an A/V connecting cable (p. 48). You cannot dub correctly using the A/V connecting cable. • The A/V connecting cable is not connected properly. Make sure that the A/V connecting cable is connected to the input jack of another device for dubbing a picture from your camcorder (p. 49). Troubleshooting New sound added to a recorded tape is not heard. • Adjust [AUDIO MIX] from the [ST1] (original sound) side until the sound is heard appropriately (p. 53). Pictures from connected devices are not displayed correctly. • The input signal is not NTSC (p. 79). Connecting to a computer The computer does not recognize your camcorder. • Disconnect the cable from the computer and camcorder, then connect it again securely. • Disconnect USB devices other than the keyboard, the mouse, and the camcorder from the (USB) jack on the computer. • Disconnect the cable from the computer and camcorder, restart the computer, then connect them again correctly. An error message appears when you place the supplied CD-ROM in your computer. • Set the computer display as follows: - Windows: 800 × 600 dots or more, High Color (16 bits, 65,000 colors) or more - Macintosh: 1,024 × 768 dots or more, 32,000 colors or more Continued , 71