Sony DSC-HX90V Help Guide (Printable PDF) - Page 139
GPS Auto Time Cor. DSC-HX90V, GPS Auto Area Adj. DSC-HX90V
View all Sony DSC-HX90V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
you turn on this product. If you shoot images before the product acquires the location information, the information is not recorded on the images. To record a correct location information, first make sure the product receives the GPS signal, then shoot the images. Check whether the location information has been recorded by displaying latitude and longitude on the playback screen after shooting. While searching for satellites and triangulating, do not put your finger over the Wi-Fi sensor (built-in). This may decrease the receiver sensitivity, making it difficult or impossible to triangulate your location. During take off and landing of an airplane, set [Airplane Mode] to [On]. Use GPS in accordance with the regulations of the countries or regions where you use the product. [150] How to Use Changing settings Setup menu GPS Auto Time Cor. (DSC-HX90V) The product acquires the time information using GPS while the product is turned on, and the information is used for maintaining the accurate time setting. The product adjusts the time setting when it is turned off. 1. MENU → (Setup) → [GPS Settings] → [GPS Auto Time Cor.] → desired setting. Menu item details On: Uses GPS auto time correction. Off: Does not use GPS auto time correction. Note [GPS Auto Time Cor.] is not available when [GPS On/Off] is set to [Off]. Before using the [GPS Auto Time Cor.] function, set [Date/Time Setup]. The corrected time may differ from the actual time for a few seconds. [GPS Auto Time Cor.] may not activate correctly in some areas. [151] How to Use Changing settings Setup menu GPS Auto Area Adj. (DSC-HX90V)