Sony DSC-RX1R Cyber-shot® User Guide (Printable PDF) - Page 52

3. Turn the aperture ring to select the aperture (F value). 4. Press the shutter button halfway down to adjust the focus. 5. Press and hold the shutter button for the duration of the shooting. As long as the shutter button is pressed, the shutter remains open. Notes Since the shutter speed becomes slow and the camera shake tends to occur more easily, it is recommended that you use a tripod. The longer the exposure time, the more conspicuous the noise on the image. After shooting, noise reduction (Long Exposure NR) will be done for the same amount of time that the shutter was open. You cannot do any further shooting during the reduction. When the [Smile Shutter] or [Auto HDR] function is activated or when using [HDR Painting] or [Richtone Mono.] in [Picture Effect], you cannot set the shutter speed to [BULB]. When the shutter speed is set to [BULB], if you use [Smile Shutter], [Auto HDR], or [HDR Painting] or [Rich-tone Mono.] in [Picture Effect], the shutter speed is temporarily set to 30 seconds. Manual shift You can change the aperture (F value) and shutter speed combination while keeping the exposure you have set. 1. Press and hold the AEL button and turn the aperture ring to select the aperture (F value) and shutter speed combination. Related Topic Functions not available in some REC modes Still shooting menu items not available in some REC modes Copyright 2013 Sony Corporation Back to top 52