Sony DSC-U10 Operating Instructions (primary manual) - Page 15
Charging time, Battery remaining indicator when, using Nickel Metal Hydride batteries - lcd screen
View all Sony DSC-U10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Charging time Nickel Metal Hydride battery NH-AAA-DI × 2 (supplied) Charging time Approx. 13 hours This represents the time required to charge fully depleted Nickel Metal Hydride batteries using the supplied BC-CS1 charger in an environment where the ambient temperature is 25°C (77°F). • It takes about 13 hours to completely charge the batteries. The CHARGE lamp may remain lit longer than 13 hours, but this is not a malfunction. • Do not remove the batteries while charging is still in progress. If you remove the batteries while charging is still in progress and then re-insert the batteries, the charging process will start over from the beginning. • If you use the ACC-UNQ STAMINA "Super Quick charge" kit (not supplied), the batteries will charge faster. Charging time Size AAA Nickel Metal Hydride batteries 2 batteries: Approx. 1 hour 15 minutes 4 batteries: Approx. 2 hours 30 minutes Battery remaining indicator (when using Nickel Metal Hydride batteries) As the battery power decreases with use, the battery remaining indicator displays the amount of power remaining using the following symbols. Battery remaining indicator Battery remaining guidelines Sufficient power remaining Battery half full Battery low, recording/playback will stop soon. Change the batteries for fully charged ones, or charge these batteries. (Battery remaining indicator flashes.) • If the LCD screen display is off, set [DISPLAY] in [ ] to [ON] with MENU and v/V on the control button to turn it on. • Based on the conditions under which the camera is being used and the state of the charge, or on the environment, this information may not be correctly indicated. • The battery remaining indicator is not displayed in USB connecting. 15 Getting started