Sony DSC-U10 Operating Instructions (primary manual) - Page 84
Other, If the functions still do not work, press
View all Sony DSC-U10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Symptom You have formatted a "Memory Stick" by mistake. Other Symptom Your camera does not work. The power is on, but the camera does not work. You cannot identify an indicator on the LCD screen. The lens gets fogged. Cause Solution • All the images on the "Memory Stick" are - deleted by formatting and cannot be restored. Cause • The battery level is low. (The E indicator appears.) • The USB cable is connected. • The built-in microcomputer is not working properly. • The built-in microcomputer is not working properly. - • Moisture condensation has occurred. Solution p Charge the batteries (page 12). p Disconnect the USB cable, or operate on your computer. p Turn the power off and then on after one minute, and check that the camera works properly. p Remove the batteries, then install them again after about one minute and turn on the camera. If the functions still do not work, press the RESET button located on the bottom of the camera using a fine-tipped object, then turn the power on again (page 78). (If you press the RESET button, all settings including the date and time are cleared.) p Check the indicator (page 96). p Turn off the camera and wait for about an hour at the room temperature for the moisture to evaporate before use (page 91). 84