Sony HTIS100 Operating Instructions - Page 14
To avoid short-circuiting the speakers - black friday
UPC - 027242731332
View all Sony HTIS100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Tip • You can remove the speaker cords from the connector. With the catch facing down, press and hold the connector down against a flat surface (1) and remove the speaker cords from the connector (2). (1) (2) Catch Note • When you reconnect the speaker cords to the connector, be sure to match the speaker cords to the appropriate speaker terminals: 3 to +, and # to -. Connect the cord with white letters or lines (to which a black tube is also attached on one side) to -. If the cords are reversed, the sound will lack bass and may be distorted. White letters or lines # Black tube To avoid short-circuiting the speakers Short-circuiting of the speakers may damage the system. To prevent this, be sure to follow these precautions when connecting the speakers. Make sure the bare wire of each speaker cord does not touch another speaker terminal or the bare wire of another speaker cord, such as shown below. Stripped speaker cord is touching another speaker terminal. Stripped cords are touching each other due to excessive removal of insulation. 14US