Sony HTIS100 Operating Instructions - Page 73
Additional Information, Troubleshooting - compare
UPC - 027242731332
View all Sony HTIS100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Additional Information Troubleshooting If you experience any of the following difficulties while using the system, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. When bringing the system in for repairs, be sure to bring in the entire system. General The power is not turned on. • Check that the AC power cord (mains lead) is connected securely. If "PROTECTOR" and "PUSH POWER" appears alternately in the top panel display. Press ?/1 to turn off the system, and check the following item after "STANDBY" disappears. • Is anything blocking the ventilation holes of the system? After checking the above item and fixing any problems, turn on the system. If the cause of the problem cannot be found even after checking the above item, consult your nearest Sony dealer. Dolby Digital or DTS multi channel sound is not reproduced. • Check that the playing Blu-ray Disc, DVD, etc., is recorded in Dolby Digital or DTS format. • Check that audio setting (settings for the audio output) of the connected component. The surround effect cannot be obtained. • Depending on the digital signal, the surround processing may not work (page 38). No sound or only a very low-level sound is heard from the speakers. • Press MASTER VOL + and check the volume level. • Press MUTING or MASTER VOL + to cancel the muting function. • Press SOUND FIELD and check the selected sound field. • Depending on the source, the sound effect of the speakers may be less noticeable. The sound comes from the center speaker only. • Check the speaker connections and settings (page 15, 55). • Depending on the disc, the sound may come from the center speaker only. No sound is heard from the center speaker. • Check the speaker connections and settings (page 15, 55). • Set the sound field to other than "OMNIDIRECTIONAL SOUND" (page 38). • Depending on the source, the effect of the center speaker may be less noticeable. No sound or only a very low-level sound is heard from the surround speakers. • Check the speaker connections and settings (page 15, 55). • Check the selected sound field (page 38). • Depending on the source, the effect of the surround speakers may be less noticeable. • A monaural or stereo (not multi channel) signal is being played. The sound is delayed compared to the image of the TV. • Set "A/V SYNC" to "SYNC OFF" when "A/V SYNC" is set. Connected components There is no sound or only a very low-level sound no matter which component is selected. • Check that this system and components are connected correctly and securely. • Check that both this system and the selected component are turned on. There is no sound from the selected component. • Check that the component is connected correctly to the audio input jacks for that component. continued 73US Additional Information