Sony HTIS100 Operating Instructions - Page 29

Getting Started Function for Conversion of Video Signals The subwoofer is equipped with a function for converting video signals. Video signals and component video signals can be output as HDMI video signals and these upconverted video signals can only be output from the HDMI TV OUT jack. See the illustration that follows. In the video input/output conversion table of the subwoofer Input signals A BC Bottom of the subwoofer BD IN DVD IN IR REMOTE SAT IN ANTENNA FM TV OUT HDMI AM VIDEO VIDEO IN DVD IN SAT IN MONITOR OUT Y IR IN IR OUT1 IR OUT2 DMPORT ECM-AC2 IR-R100 DC 5V 0.7A MAX EZW-T100 75 COAXIAL OPTICAL ASSIGNABLE L COAXIAL TV IN DVD IN SAT IN DIGITAL SPEAKER R SAT IN AUDIO IN ASSIGNABLE ONLY FOR SS-IS15 PB/ CB PR/ CR COMPONENT VIDEO CENTER FRONT R FRONT L SUR R SUR L Output signals C ABC OUTPUT jack HDMI TV OUT INPUT jack COMPONENT VIDEO MONITOR OUT HDMI IN A a X VIDEO IN B X COMPONENT a VIDEO IN C : Video signals are up-converted and output through the video converter. a : The same type of signal as that of the input signal is output. Video signals are not up-converted. X : Video signals are not output. Notes on converting video signals • When video signals from a VCR, etc., are converted on the subwoofer and then output to your TV, depending on the status of the video signal output, the image on the TV screen may appear distorted horizontally, or no image may be output. • HDMI video signals cannot be converted to component video signals. • The up-converted video signals are output only from the HDMI OUT jack. They are not output from any other video jacks. • When you play back a VCR with an image improvement circuit, such as TBC, the images may be distorted or may not be output. In this case, set the image improvement circuit function to off. 29US