Sony KV-36FV27 Operating Instructions - Page 60
Programming the Remote Control, steps 2 and 3.
View all Sony KV-36FV27 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Other Information Programming the Remote Control The remote control is preset to operate Sony-brand video equipment. Sony Equipment Beta, ED Beta VCRs 8 mm VCR VHS VCR DVD Player Switch Position on Remote Control AV1 AV2 AV3 DVD Programmable Code Number 303 302 301 751 If you have video equipment other than Sony brand that you want to control with the TV's remote control, use the following procedure to program the remote control. ✍ The equipment must have infrared (IR) remote capability in order to be used with the remote control. z ❑ If more than one code number is listed, try entering them one by one until you come to the correct code for your component. ❑ If you enter a new code number, the code number you previously entered at that setting is erased. ❑ In some cases, you may not be able to operate your component with the supplied remote control. In such cases, use the component's own remote control unit. ❑ Whenever you remove the batteries to replace them, the code numbers may revert to the factory setting and must be reset. 1 Check the list of "Manufacturer's Codes" on page 53, and find the three-digit code number for the manufacturer of your component. (If more than one code number is listed, use the number listed first.) ✍ You must do step 4 within 10 seconds of step 3, or you must redo steps 2 and 3. 2 Press CODE SET. 3 Press the function button for the type of component you want to control with the TV's remote control (VCR/DVD or SAT/ CABLE). 4 Enter the three-digit manufacturer's code number. 5 Press ENTER. 6 To check if the code number works, aim the TV's remote control at the component and press the green POWER button that corresponds with that component. If it responds, you are done. If not, try using another code listed for that manufacturer. 52