Sony NEX-VG30H "Handycam" Handbook - Page 89
Memory card, Recording, Pressing START/STOP or PHOTO does
View all Sony NEX-VG30H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Table of Contents Search image The buttons on the touch panel do not work correctly or do not work at all. Adjust the touch panel ([Calibration]) (p. 103). The image in the viewfinder is not clear. Move the viewfinder lens adjustment lever until the image appears clearly (p. 26). No display on the LCD screen although it is open. If the eye sensor switches to the viewfinder, the LCD screen turns off. Set [VF/Panel] to [Panel] (p. 84). Memory card Operations using the memory card cannot be performed. If you use the memory card formatted on a computer, format it again on your camcorder (p. 81). Images stored on the memory card cannot be deleted. The maximum number of images that you can delete on the index screen at one time is 100. You cannot delete the protected images. The data file name is not indicated correctly or flashes. The file is damaged. The file format is not supported by your camcorder (p. 100). Recording Refer also to "Memory card" (p. 89). Pressing START/STOP or PHOTO does not record images. The playback screen is displayed. Press MODE to turn on the (Movie) or (Photo) lamp (p. 30). Your camcorder is recording the image you have just shot on the memory card. You cannot make new recording during this period. The memory card is full. Delete unnecessary images (p. 51). When [Shooting w/o Lens] (p. 85) is set to [Disable], shooting is not possible in the following cases; The lens is not attached correctly. The attached lens does not support the E- mount lens communication standard. Check the dedicated support web site or consult your local authorized Sony service facility on compatible lenses. Total number of movie scenes or photos exceeds the recordable capacity of your camcorder. Delete unnecessary images (p. 51). The temperature of your camcorder is extremely high. Turn off your camcorder and leave it for a while in a cool place. The temperature of your camcorder is extremely low. Turn off your camcorder and take it to a warm place. Leave the camcorder there for a while, then turn on the camcorder. The lens is not attached correctly. Reattach the lens. The access lamp remains lit or flashing even if recording was stopped. Your camcorder is recording the scene you have just shot on the memory card. The imaging field looks different. The imaging field may look different depending on the condition of your camcorder. This is not a malfunction. The actual recording time for movies is less than the expected recording time of the recording media. Depending on the recording conditions, the time available for recording may be shorter, for example when recording a fast moving object, etc (p. 96). The camcorder stops operating. The temperature of your camcorder is extremely high. Turn off your camcorder and leave it for a while in a cool place. Index US 89