Sony RDR-GX310 Operating Instructions - Page 41

Timer Recording Recording a stereo/SAP program The recorder can receive and record stereo/SAP programs. Stereo programs When a stereo program is received, the "STEREO" indicator lights up on the front panel display. If there is noise in the stereo program, set "Auto Stereo" in "Options" setup to "Off" (page 82). The sound will be recorded in monaural but with less noise. SAP (Second Audio Program) When a SAP (Second Audio Program) is received, the "SAP" indicator lights up on the front panel display. To record only SAP sound, set "Tuner Audio" in "Options" setup to "SAP" (page 82). z Hint You can select the audio (main or SAP) while recording bilingual programs using the AUDIO button. This does not affect the recorded sound. Timer Recording (Standard/ G-Code) +RW -RWVR -RWVideo +R -R You can set the timer for a total of 30 programs, up to one month in advance. There are two methods to set the timer: the standard method and G-Code method. • Standard: Set the date, time, and program position of the program manually. • G-Code: Enter the G-Code number designated for each TV program (page 43). b Note Do not operate your cable box or satellite receiver just before or during a timer recording. This may prevent the accurate recording of a program. Setting the timer manually (Standard) Unrecordable pictures Pictures with copy protection cannot be recorded on this recorder. When the recorder receives a copy guard signal, the recorder continues to record but only a blank, grey colored screen will be recorded. Copy control signals Copy-Free Recordable discs +RW +R -RWVR -RWVideo -R Copy-Once -RWVR (CPRM*) Copy-Never None (a blank screen is recorded) * The recorded disc can be played only on CPRM compatible equipment (page 8). [TIMER] 123 456 789 0