Sony RDR-GX310 Operating Instructions - Page 72
Program Edit, Select DV/D8 EDIT, and press ENTER.
View all Sony RDR-GX310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Program Edit +RW -RWVR -RWVideo +R -R You can select scenes from a DV/Digital8 format tape, and then automatically record selected scenes to a DVD. To use this function, you will do the following: Connect your digital video camera and prepare for recording m Select and edit the scenes you want to dub Using the recorder's remote control, fast forward or rewind the tape to select the scenes. At this point, the selected scenes are not copied to the disc. The recorder only remembers the IN and OUT points of the scenes that you selected for dubbing. You can also reset, erase, or change the order of the scenes. m Dub the selected scenes After you have selected the scenes, the recorder will fast forward and rewind the tape automatically and record the scenes to a DVD. How chapters are created The contents dubbed to DVD become a single title. When "Auto Chapter" of "Features" setup is set to "On," this title is divided into chapters. When dubbing to a DVD-RW (VR mode), each shooting session on the tape becomes a chapter on the disc. For other discs, the recorder divides the title into chapters at approximately 6 minute intervals. 1 Follow steps 1 to 5 of "Preparing for DV/ Digital8 dubbing" on page 70, and press SYSTEM MENU. 2 Select "DV/D8 EDIT," and press ENTER. The display asks if you want to start selecting scenes. Scene Selection Do you want to select a scene? Start Cancel • If you have previously saved a program, the display asks if you want to edit an existing program or to create a new program. To resume editing the existing program, select "Saved Data," and go to step 6. 3 Select "Start," and press ENTER. The display for setting the IN point (start of the scene) appears. The scene starts to play in the background. Select scene(Set IN point) Controlling... 4 Select the IN point by pressing m/M, and press ENTER. The display for setting the OUT point (end of the scene) appears. The scene starts to play in the background from the IN point. 5 Select the OUT point by pressing m/M, and press ENTER. The display asks if you want to add the selected scene to the Scene List menu. To preview the scene, select "Preview." To reset either the IN or OUT point, select "Change IN" or "Change OUT," and repeat from step 4. Scenes Selection Do you want to capture the scene between IN 0:00:30 and OUT 0:00:52? OK Preview Cancel Change IN Change OUT 72