Sony STR-DA4400ES Operating Instructions (Large File - 23.37 MB) - Page 112

x INPUT (for "Main" only) Lets you turn on the output of 12V triggers when the preset input is selected. When you select "Input," the setting display which sets each input trigger to on/off appears. Press V/v to select the input, then press to check the box. x MAIN (for "Zone2" and "Zone3" only) Lets you link operation of trigger in zone 2 or zone 3 to the main receiver. Tips • Even when this receiver is standby mode (press ?/1 on the remote to turned off this receiver), the receiver in zone 2 or zone 3 remains turned on. • Only signals from components connected to the analog input jacks are output through the ZONE 2 OUT/ZONE 3 OUT jacks. No signals are output from components connected to only the digital input jacks. • When SOURCE is selected, the signals input to the MULTI CHANNEL INPUT jacks are not output from the ZONE 2 OUT or ZONE 3 OUT jacks even when the multi-channel input is selected. The analog audio signals of the current function are output. • When "Tuner" is selected; the same type of radio station (FM/AM) selected in the main zone is set in zone 2 and zone 3. However, you can select the input other than "Tuner" in zone 2 and zone 3. • When the receiver in the main zone is turned off, or an input source other than "Tuner" is selected, you can select a radio station from AM or FM in zone 2. When the receiver in the main zone and zone 2 are turned off, you can select a radio station from AM or FM in zone 3. When two of the receivers in the main zone, zone 2 or zone 3 are turned off, you can select a broadcast from FM/AM/XM/SIRIUS in one zone in which the receiver is turned on. Audio settings You can make settings for the audio to suit your preference. A/V Sync (Synchronizes audio and video output) Lets you delay the output of audio to minimize the time gap between audio output and visual display. x 0 ms - 300 ms You can adjust the delay from 0 ms to 300 ms in 10 ms steps. Notes • This function is useful when you use a large LCD or plasma monitor or a projector. • This function does not work in the following cases. - The multi-channel input is selected. - "2ch Analog Direct" is being used. Dual Mono (Digital broadcast language selection) Lets you select the language you want to listen to during a digital broadcast. This feature only functions for Dolby Digital sources. x MAIN/SUB Sound of the main language will be output through the front left speaker, and sound of the sub language will be output through the front right speaker simultaneously. x MAIN Sound of the main language will be output. x SUB Sound of the sub language will be output. 112GB