Sony STR-DA4400ES Operating Instructions (Large File - 23.37 MB) - Page 15
Main remote commander, RM-AAL016 - hdmi switch
View all Sony STR-DA4400ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Remote commander You can use the supplied remote to operate the receiver and to control the Sony audio/video components that the remote is assigned to operate. Main remote commander (RM-AAL016) The RM-AAL016 remote is used for illustration purpose. Name A AV ?/1 (on/ standby) B ?/1 (on/ standby) Function Press to turn on or off the audio/ video components that the remote is assigned to operate (page 124). If you press ?/1 (2) button at the same time, it will turn off the receiver and other Sony components (SYSTEM STANDBY). Note The function of the AV ?/1 switch changes automatically each time you press the input button (5). Press to turn the receiver on or off. If zone 2 or zone 3 is selected, only the main receiver is turned on or off with this button. To turn off all components including an amplifier in zone 2 or zone 3, press ?/1 and AV ?/ 1 (1) at the same time (SYSTEM STANDBY). C ZONE D AMP E Input buttons F TV INPUT G WIDE Saving the power in standby mode. When "Control for HDMI" (page 115) and "RS-232C Control" (page 116) are set to "OFF." Press to switch the zone 2 or zone 3 operation (page 83). Press to enable the receiver operation (page 41). Press one of the buttons to select the component you want to use. When you press any of the input buttons, the receiver turns on. The buttons are factory assigned to control Sony components (page 53, 87). You can program the remote to control non-Sony components following the steps in "Programming the remote" (page 124). Press TV (wf), then press TV INPUT to select the input signal of a TV. Press TV (wf), then press WIDE repeatedly to select the wide picture mode. continued 15GB