Sony STR-DA4400ES Operating Instructions (Large File - 23.37 MB) - Page 87
Switching the zone setting of the remote
View all Sony STR-DA4400ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Using Multi-zone Features Switching the zone setting of the remote The remote commanders are initially set to be used in zone 2. If you want to use them in zone 3, switch the zone setting of the remote. RM SET UP SHIFT ?/1 ZONE 2, 3 Operating the receiver from another zone (ZONE 2/ZONE 3 operations) The following operations are described for connecting an IR repeater and operating the receiver in zone 2 or zone 3. When an IR repeater is not connected, use this receiver in the main zone. ?/1 ZONE ENT/ MEM 1 Press ?/1 while pressing RM SET UP. The AMP and ZONE buttons flash. 2 Press ZONE. The AMP button goes off, the ZONE button keeps flashing and the SHIFT button lights up. 3 Press the numeric button 2 for the zone 2, or 3 for the zone 3 while the ZONE button is flashing. The ZONE button lights up. 4 Press ENT/MEM. The ZONE button flashes twice and the remote switches to zone 2 or zone 3 mode. Input buttons MASTER VOL 1 Turn on the main receiver (this receiver). 2 Turn on the amplifier in zone 2 or zone 3. continued 87GB