Sony STR-DA4400ES Operating Instructions (Large File - 23.37 MB) - Page 61
If you cannot tune in a station
View all Sony STR-DA4400ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Tuning Tuning into a station directly (Direct Tuning) Enter the frequency of a station directly by using the numeric buttons. 1 Press AMP. The receiver can be operated using the remote. 2 Press MENU. The menu is displayed on the TV screen. 3 Press V/v repeatedly to select " FM" or " AM," then press or b. 4 Press V/v to select "Direct Tuning," then press . 5 Press SHIFT, then press the numeric buttons to enter the frequency, then press . Example 1: FM 102.50 MHz Select 1 b 0 b 2 b 5 Example 2: AM 1,350 kHz Select 1 b 3 b 5 b 0 Tip If you have tuned in an AM station, adjust the direction of the AM loop antenna (aerial) for optimum reception. If you cannot tune in a station "- - - .- - MHz" appears and then the display returns to the current frequency. Make sure you have entered the right frequency. If not, repeat step 5. If you still cannot tune in a station, the frequency is not used in your area. Changing the AM tuning scale You can change the AM tuning scale to either 9 kHz or 10 kHz on the receiver. POWER TUNING MODE 1 Press POWER to turn off the receiver. 2 While holding down TUNING MODE, press POWER on the receiver. 3 Change the current AM tuning scale to 9 kHz (or 10 kHz). To reset the scale to 10 kHz (or 9 kHz), repeat the procedure above. Note All preset stations will be erased when you change the tuning scale. 61GB