Home » Sony Manuals » Audio Components » Sony STR-DA4400ES » Manual Viewer

Sony STR-DA4400ES Operating Instructions (Large File - 23.37 MB) - Page 2

GB, this model manufactured - receiver

Add to My Manuals
Save this manual to your list of manuals

Page 2 highlights

WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. Do not expose batteries or apparatus with batteryinstalled to excessive heat such as sunshine, fire or the like. The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off. For customers in the United States This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 2GB Owner's Record The model and serial numbers are located on the rear of the unit. Record these numbers in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No. The following FCC statement applies only to the version of this model manufactured for sale in the U.S.A. Other versions may not comply with FCC technical regulations. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Note to CATV system installer: This reminder is provided to call CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

Section	Page
GB	2
Table of Contents	4
Getting Started	19
1: Installing speakers	19
2: Connecting speakers	21
3: Connecting the monitor	23
4a: Connecting the audio components	25
4b: Connecting the video components	30
5: Connecting the antennas (aerials)	39
6: Preparing the receiver and the remote	40
7: Displaying the GUI menu on the TV screen	41
8: Setting the speakers	42
9: Calibrating the appropriate speaker settings automatically (Auto Calibration)	44
Guide to on-screen display operation	51
Playback	53
Enjoying sound/images from the component connected to the receiver	53
Enjoying sound/images from the components connected to the DIGITAL MEDIA PORT	55
Operating the TDM-iP1/ iP50/TDM-NC1 using the GUI menu of the receiver	56
Tuning	60
Listening to FM/AM radio	60
Presetting FM/AM radio stations	62
Listening to satellite radio	63
Connecting a satellite radio tuner	65
Preparing to listen to a satellite radio	65
Selecting a channel of the satellite radio	67
Presetting satellite radio channels	68
Restricting access to specific channels (Parental Lock) (SIRIUS only)	69
Enjoying Surround Sound	73
Playing back with 2-channel sound	73
Playing back with multi-channel surround	74
Enjoying a surround effect for music	77
Enjoying a surround effect for movies	79
Using Multi-zone Features	83
What you can do with the Multi-zone function	83
Making a multi-zone connection	84
Setting the speakers in zone 2	86
Switching the zone setting of the remote	87
Operating the receiver from another zone (ZONE 2/ZONE 3 operations)	87
Using Other Features	89
Using “BRAVIA” Sync features	89
Switching between digital and analog audio	92
Enjoying the sound/ images from other inputs (Input Assign)	93
Using the sleep timer	96
Enjoying the surround effect at low volume levels	96
Recording using the receiver	97
Switching the command mode of the receiver and the remote	99
Using a bi-amplifier connection	100
Adjusting Settings	102
Using the setting menu	102
Auto Calibration	103
Speaker settings	105
Surround settings	109
EQ settings	110
Multi Zone settings	111
Audio settings	112
Video settings	113
HDMI settings	115
System settings	116
Operating without connecting to a TV	116
Using the Remote	122
Operating each component using the remote	122
Programming the remote	124
Performing several commands in sequence automatically (Macro Play)	127
Setting remote commander codes that are not stored in the remote	129
Clearing all the contents of the remote’s memory	131
Additional Information	132
Glossary	132
Precautions	135
Troubleshooting	136
Specifications	141
Index	143
FR	146
Table des matières	148
Mise en service	166
1: Installation des enceintes	166
2: Raccordement des enceintes	168
3: Raccordement de l’écran	170
4a: Raccordement des appareils audio	172
4b: Raccordement des appareils vidéo	177
5: Raccordement des antennes	186
6: Préparation de l’ampli- tuner et de la télécommande	187
7: Affichage du menu GUI sur l’écran du téléviseur	188
8: Réglage des enceintes	189
9: Calibrage automatique aux réglages appropriés (Auto Calibration)	191
Guide pour les opérations à l’écran	198
Lecture	201
Écoute du son/visionnage d’images à partir de l’appareil raccordé à l’ampli-tuner	201
Écoute du son/visionnage d’images à partir des appareils raccordés au DIGITAL MEDIA PORT	203
Commande du TDM-iP1/ iP50/TDM-NC1 à l’aide du menu GUI de l’ampli- tuner	205
Sélection des stations	208
Écoute de stations de radio FM/AM	208
Préréglage des stations de radio FM/AM	210
Écouter la radio satellite	211
Raccorder un tuner radio satellite	213
Préparer la réception de la radio satellite	213
Sélectionner un canal de la radio satellite	215
Prérégler les canaux de la radio satellite	216
Restreindre l’accès à des canaux spécifiques (Parental Lock) (SIRIUS uniquement)	218
Écoute du son surround	222
Lecture avec un son 2 canaux	222
Lecture avec son surround multicanal	223
Écoute d’un effet surround pour de la musique	226
Écoute d’un effet surround pour des films	228
Utilisation des fonctionnalités multizone	232
Ce que vous pouvez faire avec la fonction multizone	232
Effectuer un raccordement multizone	233
Réglage des enceintes dans la zone 2	235
Changer le réglage de la zone de la télécommande	236
Commande de l’ampli- tuner depuis une autre zone (Commandes ZONE 2/ZONE 3)	236
Utilisation des autres fonctionnalités	238
Utilisation des fonctionnalités « BRAVIA » Sync	238
Passage entre son numérique et analogique	241
Écoute du son/visionnage d’images d’autres entrées (Input Assign)	242
Utilisation de la minuterie d’arrêt	245
Écoute du son surround à faible volume	245
Enregistrement à l’aide de l’ampli-tuner	246
Changement du mode de commande de l’ampli- tuner et de la télécommande	248
Utilisation d’un raccordement bi- amplificateur	249
Réglage des paramètres	251
Utilisation du menu de paramétrage	251
Auto Calibration	252
Paramètres Speaker	254
Paramètres Surround	258
Paramètres EQ	259
Paramètres Multi Zone	260
Paramètres Audio	262
Paramètres Video	263
Paramètres HDMI	265
Paramètres System	266
Utilisation sans raccordement à un téléviseur	266
Utilisation de la télécommande	272
Commande de chaque appareil à l’aide de la télécommande	272
Programmation de la télécommande	274
Exécution automatique d’une séquence de plusieurs commandes (Exécution de macro-commandes)	278
Mémorisation de codes de télécommande n’ayant pas été préprogrammés dans la télécommande	280
Effacement de tout le contenu de la mémoire de la télécommande	281
Informations complémentaires	282
Glossaire	282
Précautions	285
Guide de dépannage	286
Spécifications	291

Match case Limit results 1 per page

To reduce the risk of fire or electric

shock, do not expose this apparatus to

rain or moisture.

Do not install the appliance in a confined space, such

as a bookcase or built-in cabinet.

To reduce the risk of fire or electric shock, do not

expose this apparatus to dripping or splashing, and

do not place objects filled with liquids, such as

vases, on the apparatus.

As the main plug is used to disconnect the unit from

the mains, connect the unit to an easily accessible

AC outlet. Should you notice an abnormality in the

unit, disconnect the main plug from the AC outlet

immediately.

Do not expose batteries or apparatus with battery-

installed to excessive heat such as sunshine, fire or

the like.

The unit is not disconnected from the mains as long

as it is connected to the AC outlet, even if the unit

itself has been turned off.

For customers in the United

States

This symbol is intended to alert the

user to the presence of uninsulated

“dangerous voltage” within the

product’s enclosure that may be of

sufficient magnitude to constitute a

risk of electric shock to persons.

This symbol is intended to alert the

user to the presence of important

operating and maintenance

(servicing) instructions in the

literature accompanying the

appliance.

Owner’s Record

The model and serial numbers are located on the rear

of the unit. Record these numbers in the space

provided below. Refer to them whenever you call

upon your Sony dealer regarding this product.

Model No.

Serial No.

The following FCC statement

applies only to the version of

this model manufactured for

sale in the U.S.A. Other

versions may not comply with

FCC technical regulations.

NOTE:

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However,

there is no guarantee that interference will not occur

in a particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try

to correct the interference by one or more of the

following measures:

–

Reorient or relocate the receiving antenna.

–

Increase the separation between the equipment

and receiver.

–

Connect the equipment into an outlet on a circuit

different from that to which the receiver is

connected.

–

Consult the dealer or an experienced radio/TV

technician for help.

CAUTION

You are cautioned that any changes or modifications

not expressly approved in this manual could void

your authority to operate this equipment.

Note to CATV system installer:

This reminder is provided to call CATV system

installer’s attention to Article 820-40 of the NEC

that provides guidelines for proper grounding and, in

particular, specifies that the cable ground shall be

connected to the grounding system of the building,

as close to the point of cable entry as practical.

WARNING