Sony STR-DA4400ES Operating Instructions (Large File - 23.37 MB) - Page 88
To finish the zone 2/zone 3, operation, Press ZONE., Press, Press one of the input buttons
View all Sony STR-DA4400ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
3 Press ZONE. The remote switches to zone 2 or zone 3. Change the zone setting of the remote to zone 3 in advance (page 87). 4 Press ?/1. The zone function is activated. 5 Press one of the input buttons on the remote to select the source signals you want to output. For zone 2, analog video and audio signals are output. For the zone 3, only analog audio signals are output. When you select SOURCE, the signals of the current input of the main zone are output. 6 Adjust to a suitable volume. • In the case of illustration 1-1 (page 84), adjust the volume using MASTER VOL +/- on the remote. • In the case of illustration 1-2 (page 84) or 2 (page 85), adjust the volume using the receiver of zone 2 or zone 3. To finish the zone 2/zone 3 operation Press ?/1 after pressing ZONE. Tips • Even when this receiver is standby mode (press ?/1 on the remote to turned off this receiver), the receiver in zone 2 or zone 3 remains turned on. To turn off all receivers, press ?/1 and AV ?/1 on the main remote at the same time (SYSTEM STANDBY). • Only signals from components connected to the analog input jacks are output through the ZONE 2 or ZONE 3 jacks. No signals are output from components connected to only the digital input jacks. • When SOURCE is selected, the signals input to the MULTI CHANNEL INPUT jacks are not output from the ZONE 2 OUT or ZONE 3 OUT jacks even when the multi-channel input is selected. The analog audio signals of the current function are output. 88GB