Sony STR-DA90ESG Operating Instructions - Page 17

Setting Up the Remote for On-Screen Control Registering a TV (or Monitor) You must register the IR code of your TV (or monitor) in order to turn on your TV automatically whenever you turn on the receiver. IR code registration is unnecessary in the following case If your TV is a Sony product that can be controlled by an infrared remote, and it is connected to the receiver by its VIDEO 1 video input jack, you do not need to register its IR code. Registering IR codes 1 Turn on the receiver and the TV. Make sure the input selector on the TV is set to the video input. 2 Click SETUP in the main menu. FUNCTION I I SOUND LI SEM,IP LIST SUB USER BAN FM 102.50MHz STEREO 3 Click TV SET. FUNCTION I J SOUND V SETUP TV BET IR SE1U USER IR FUNC INDEX CD INDEX TUNER INDEX AUTO START SLEEP TIMER MACRO PLAY OSD SETUP SPEAKER DELAY INPUT MODE I B. EXIT 4 • Sony TV 1 Click Sony TV. 2 Click VIDEO 1, 2 or 3 to select the video input of the TV that is connected to the receiver. 3 If your TV type is a wide screen type (screen ratio:16 x 9), click WIDE (except for Australian models). The IR codes are automatically registered and registration is complete. TV MONITOR SET TV IR SET TV INPUT TV SIZE VIDE • 11011U1E1 frill740:411 ti RETURN I Bo EXIT • Non-Sony TV 1 Click OTHER TV. 2 Click VIDEO 1, 2 or 3 to select the video input of the TV that is connected to the receiver. 3 If you are using a wide TV, click WIDE (except for Australian models). 4 Go to step 5. TV MONITOR SET TV IR SET Sony TV OTHER TV TV INPUT TV SIZE VIDEOL 1 2 3 ItOonts4AILVAOE U RETURN I I B, EXIT 5 Cover the IR sensor on the TV to prevent accidental operation. Otherwise, the on-screen display may be turned off during the registration procedure. 6 Click START. TV MONITOR SET TV IR SET MCOTSHIEMR MTVIE M'r TV INPUT TV SIZE VNIODREMOAL1 Eng U RETURN I IF EXIT (continued) 17