Sony STR-DA90ESG Operating Instructions - Page 20
manufacturers
View all Sony STR-DA90ESG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Setting Up the Remote for On-Screen Control 5 Click the respective component. IR CODE SETTING MAKER L Sony OUTPUT IR 1114.t.111 • I OTHER I 'rye nom t/ RETURN I START • If the component is not a VCR or laser disc player 1 Cover the IR sensor on the component to prevent accidental operation during the registration procedure. 2 Click START, then go to step 6. • If the component is a VCR, DVD or laser disc player: 1 Click START. A list of other manufacturers appears. CD Immo RETURN [1 ~ E EXIT 2 Click the manufacturer of the component you want. The IR codes for that component are automatically registered. TEST If the manufacturer is not listed, cover the IR sensor on the component to preVent accidental operation during the registration procedure, click OTHER, then go to step 6. 3 Click TEST. If the selected component turns on, the IR codes have been registered. The registration is complete. If the component does not turn on: Click the number button beside the manufacturer's name to select another number, then click TEST again. If the component still does not turn on: Cover the IR sensor on the component to prevent accidental operation during the registration procedure is complete, click OTHER, then go to step 6. 6 When "PUSH YOUR REMOTE" appears, press the button on your audio/video component's remote that corresponds to the control button highlighted. El is the POWER switch. After you have registered all the IR codes, the IR CODE SETTING menu reappears. IR CODE SETTING PUSH ti RETURN I [ill 8 -91 ENTER YOUR REMOTE CODE CLEAR IIEXIT , LEARNING SENSOR is • • 0 audio/video component's remote When registering the IR code, be sure to do the following; otherwise, the IR code may not be registered correctly. • Point the remote at the LEARNING SENSOR on the receiver from a distance of less than 4 inches (10 cm). • Hold down the button on the remote for about 2 or 3 seconds until the "RECEIVING" display switches to "RELEASE YOUR REMOTE". • Keep the remote pointed horizontally at the LEARNING SENSOR until the code is registered. 7 Repeat steps 3 to 6 to register IR codes from other components. 20