Sony STR-DA90ESG Operating Instructions - Page 59

Additional Information Specifications Dynamic power output (USA and Canadian models only) 165 W + 165 W, 8 ohms 280 W+ 280 W, 4 ohms Digital signal processor section Modulation High Density Linear (AID conversion) Converter . Audio power specifications POWER OUTPUT AND TOTAL HARMONIC DISTORTION With 8-ohm loads both channels driven, from 20 20,000 Hz; rated 120watts per channel minimum RMS power, with no more than 0.05 % total harmonic distortion from 250 milliwatts to rated output (USA model only). Amplifier section POWER OUTPUT Stereo mode 8 ohms 20 Hz - 20 kHz, THD 0.05%, 120 W+ 120 W Surround mode (8 ohms at 1kHz, THD 0.05%) Front: 120 W/ch Centel': 120 W Rear*: 120 W/ch No sound may be output when using certain sound sources and/or sound mode settings. Harmonic distortion at rated output Less than 0.05% (Direct Pass) Frequency response Input (ANALOG) PHONO: RIAA equalization curve ±0.5 dB CD, TAPE, DAT/MD, LD,DVD, TV /DBS, ' VIDEO: 10 Hz - 50 kHz _;'dB (Direct Pass) Sensitivity Impedance S/N PHONO 2.5 mV 50 75 dB* kilohms (A, 23 mV) CD, TAPE, DAT/MD, VIDEO, 200 mV LD/DVD, TV/DBS 50 82 dB* kilohms (A, 200mV) Input (DIGITAL) Sensitivity Impedance S/N LD/DVD - 75 ohms 100 dB AC-3 RF (A, 20 kHz LPF) LD/DVD - COAXIAL 75 ohms 100 dB (A, 20 kHz LPF) LD/DVD, CD DAT/MD, TV/DBS, OPTICAL IHF 100 dB (A, 20 kHz LPF) Outputs REC OUT VIDEO 1, 2 (AUDIO) OUT: Voltage 200 mV, Impedance 10 kilohms PRE OUT Voltage: 2 V Impedance: 1 kilohms PHONES: Accepts low and high impedance headphones Demodulation (D/A conversion) High Density Linear Converter (Advanced Pulse D/A converter) Sampling frequency 48 kHz Surround LFE MIX MUTE, -20 - 0 dB, 0.5 dB step D.RANGE COMP OFF, 0.1 - 0.9, STD, MAX REAR level - 20 - +10 dB, 0.5 dB step CENTER level - 20 - +10 dB, 0.5 dB step SUB WOOFER level -20 - +10 dB, 0.5 dB step WALL 17-step adjustable SEAT L/ R 17-step adjustable F/R 17-step adjustable EFFECT 21-step adjustable REVERB time 17-step adjustable The available parameters are different for each sound field, see page 34 for details. Equalizer Band BASS/TREBLE Turnover frequency BASS: 99 Hz - 992 Hz TREBLE: 1.0 kHz - 8.6 kHz Level ±10 dB, 0.5 dB step BASS BOOST +6 dB at 70 Hz (continued) 59