Sony Sound Forge Quick Start Guide - Page 34

Burning CDs You can write your own audio to CD if your system is configured with a supported CD-R/RW drive and the necessary drivers. You can burn either single tracks (track-at-once) or the entire disc (disc-at-once). Track-at-once writing records individual tracks to the disc and results in a partially recorded disc. Additional tracks can be added to the CD over a period of time. Once all desired tracks are added, you must close the CD before it can be played in a consumer CD player. However, once you have closed a CD, you can no longer add tracks to it. With the disc-at-once method, multiple tracks of audio are written to the CD in one recording session. Burning single tracks (track-at-once) You should always save your audio files prior to writing them to CD. 1. From the Tools menu, choose Burn Track-at-Once Audio CD. The Burn Track-at-Once Audio CD dialog is displayed. The bottom of the dialog displays the length of the current audio file and the amount of time remaining on the CD currently in the CD-R/ RW. Note: If there is no CD in the current drive, only the Drive and Speed drop-down menus and the Close button are available in this dialog. If you insert a disc or select a different drive after this dialog is displayed, it takes a moment to recognize the disc and make all options available. 2. Choose a setting from the Action drop-down list: Setting Description Burn audio Test, then burn audio Test only Close disc Erase RW disc Begins recording audio to your CD when you click the Start button. You will need to close the disc before it can be played in an audio CD player. Performs a test to determine whether your files can be written to the CD recorder without encountering buffer underruns. Recording begins after the test if it is successful. Performs a test to determine whether your files can be written to the CD without encountering buffer underruns. No audio is recorded to the CD. Closes your disc without adding any audio when you click the Start button. Closing a disc allows your files to be played on an audio CD player. Erases your rewritable CD when you click the Start button. You should use this option if your rewritable CD already has data on it. 3. Select your burning options: Option Description Buffer underrun protection Select this check box if your CD recorder supports buffer underrun protection. Buffer underrun protection allows a CD recorder to stop and resume burning. Erase RW disc before burning If you're using a rewritable CD, select this check box to erase the CD before you begin burning if your rewritable CD already has data on it. Close disc when done burning Select this check box to close the CD after burning. Closing a disc allows your files to be played on an audio CD player. Note: You can close the disc using a separate step later. For more information, see Closing a CD on page 31. Eject disc when done Burn selection only Select this check box to eject the CD automatically when burning has completed. Select this check box to burn only the audio within the loop region. 4. From the Drive drop-down list, choose the CD-R/RW drive that you want to use to burn your own audio to CD. 5. From the Speed drop-down list, choose the speed at which you want to burn. Max will use your drive's fastest possible speed; decrease the setting if you have difficulty burning. 6. Click the Start button. Important: Clicking Cancel after the CD writing process begins renders the CD unusable. After your audio is written to CD, the CD Operation dialog indicates whether the writing was successful. 7. Click OK to clear the message. 30 | CHAPTER 7