Stihl MSE 210 C-BQ Instruction Manual - Page 21

E = Hinge E E Felling Cut for Small Diameter Trees: Simple Fan Cut English Felling Cut for Large Diameter Trees 1 001BA145 KN 001BA147 KN 001BA148 KN N Helps control the falling tree. N Do not cut through the hinge - you could lose control of the direction of the fall. Engage the bumper spikes of the chain saw directly behind the location of the intended hinge and pivot the saw around this point only as far as the hinge. The bumper spike rolls against the trunk. WARNING Felling a tree that has a diameter greater than the length of the guide bar requires use of either the sectioning felling cut or plunge-cut method. These methods are extremely dangerous because they involve the use of the nose of the guide bar and can result in kickback. Only properly trained professionals should attempt these techniques. Sectioning Method For the sectioning method make the first part of the felling cut with the guide bar fanning in toward the hinge. Then, using the bumper spike as a pivot, reposition the saw for the next cut. MSE 170 C, MSE 210 C 19