Stihl MSE 210 C-BQ Instruction Manual - Page 45

Specifications

Get Stihl MSE 210 C-BQ PDF manuals and user guides View all Stihl MSE 210 C-BQ manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Definitions 1. Reset Button for Overload Cutout Overload cutout interrupts power supply to the motor when excessive infeed force is used or when the chain is pinched in the cut. The button jumps out. For resetting it needs to be pushed back. 2. Chain Sprocket The toothed wheel that drives the saw chain. 3. Chain Sprocket Cover Covers the sprocket. 4. Chain Catcher Helps to reduce the risk of operator contact by a chain when it breaks or comes off the bar. 5. Side Chain Tensioner Permits precise adjustment of chain tension. 6. Bumper Spike Toothed stop for holding saw steady against wood. 7. Guide Bar Supports and guides the saw chain. 8. Oilomatic Saw Chain A loop consisting of cutters, tie straps and drive links. 9. Adjusting Wheel for Quick Chain Tensioner Permits precise adjustment of chain tension. 10. Handle of Wingnut for Quick Chain Tensioner Has to be released to tension chain with adjusting wheel. 11. Front Hand Guard Provides protection against projecting branches and helps prevent left hand from touching the chain if it slips off the handlebar. It also serves as the lever for chain brake activation. 12. Front Handle (Handlebar) Handlebar for the left hand at the front of the saw. 13. Oil Filler Cap For closing the oil tank. 14. Oil Sight Glass For visually checking the oil level. 15. Trigger Switch Lockout Must be depressed before the trigger switch can be activated. 16. Trigger Switch Switches the motor on and off. 17. Rear Handle The support handle for the right hand, located at the rear of the saw. 18. Rear Hand Guard Gives added protection to operator's right hand. 19. Chain Sprocket Cover with Quick Chain Tensioner Covers the sprocket. Specifications English Motor MSE 170 C Voltage: Frequency: Rated current: Type of enclosure: Insulation: MSE 210 C Voltage: Frequency: Rated current: Type of enclosure: Insulation: Chain lubrication 120 V 60 Hz 13.1 A IP 20 II, E 120 V 60 Hz 15 A IP 20 II, E Fully automatic speed-controlled oil pump with reciprocating piston Oil tank capacity: 6.8 fl.oz (0.2 l Weight with cutting attachment MSE 170 C 9.5 lbs (4.3 kg) MSE 210 C 10.1 lbs (4.6 kg) MSE 170 C, MSE 210 C 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
MSE 170 C, MSE 210 C
English
43
Definitions
1.
Reset Button for Overload Cutout
Overload cutout interrupts power
supply to the motor when excessive
infeed force is used or when the
chain is pinched in the cut. The
button jumps out. For resetting it
needs to be pushed back.
2.
Chain Sprocket
The toothed wheel that drives the
saw chain.
3.
Chain Sprocket Cover
Covers the sprocket.
4.
Chain Catcher
Helps to reduce the risk of operator
contact by a chain when it breaks or
comes off the bar.
5.
Side Chain Tensioner
Permits precise adjustment of chain
tension.
6.
Bumper Spike
Toothed stop for holding saw steady
against wood.
7.
Guide Bar
Supports and guides the saw chain.
8.
Oilomatic Saw Chain
A loop consisting of cutters, tie
straps and drive links.
9.
Adjusting Wheel for Quick Chain
Tensioner
Permits precise adjustment of chain
tension.
10.
Handle of Wingnut for Quick Chain
Tensioner
Has to be released to tension chain
with adjusting wheel.
11.
Front Hand Guard
Provides protection against
projecting branches and helps
prevent left hand from touching the
chain if it slips off the handlebar. It
also serves as the lever for chain
brake activation.
12.
Front Handle (Handlebar)
Handlebar for the left hand at the
front of the saw.
13.
Oil Filler Cap
For closing the oil tank.
14.
Oil Sight Glass
For visually checking the oil level.
15.
Trigger Switch Lockout
Must be depressed before the
trigger switch can be activated.
16.
Trigger Switch
Switches the motor on and off.
17.
Rear Handle
The support handle for the right
hand, located at the rear of the saw.
18.
Rear Hand Guard
Gives added protection to
operator's right hand.
19.
Chain Sprocket Cover with Quick
Chain Tensioner
Covers the sprocket.
Motor
MSE 170 C
MSE 210 C
Chain lubrication
Fully automatic speed-controlled oil
pump with reciprocating piston
Weight
Specifications
Voltage:
120 V
Frequency:
60 Hz
Rated current:
13.1 A
Type of enclosure:
IP 20
Insulation:
II,
E
Voltage:
120 V
Frequency:
60 Hz
Rated current:
15 A
Type of enclosure:
IP 20
Insulation:
II,
E
Oil tank capacity:
6.8 fl.oz (0.2 l
with cutting attachment
MSE 170 C
9.5 lbs (4.3 kg)
MSE 210 C
10.1 lbs (4.6 kg)