Stihl MSE 210 C-BQ Instruction Manual - Page 32
contact your dealer for assistance if
View all Stihl MSE 210 C-BQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
English Checking oil level 1 001BA238 KN 001BA235 KN 9931BA040 KN N Flip the handle down. Filler cap is now closed. If the filler cap will not engage into the tank housing The base of the filler cap is rotated in relation to the upper part. N Look at the black alignment marks on the top of the filler cap. 001BA255 KN Left: Right: Base of filler cap is rotated to the closed position - interior marking (1) is aligned with the exterior marking. Base of filler cap is in the correct position for installation - interior marking is below the clip. It does not align with the exterior marking. 1 N Check the oil level regularly during operation. N Refill the oil tank when the oil level reaches the "min" mark (1) or earlier. If the oil level in the tank does not go down, the reason may be a problem in the oil supply system: Check chain lubrication, clean the oilways and contact your dealer for assistance if necessary. STIHL recommends that you have servicing and repair work carried out exclusively by an authorized STIHL servicing dealer. 001BA256 KN N If your cap is in the closed position: with the filler cap in the filling neck, twist it counterclockwise until it drops into its seat. N Continue to twist the filler cap counterclockwise (approx. 1/4 turn) - this will twist the base of the cap into the correct position for installation. N While pushing down on the cap, twist the filler cap clockwise and close it - see section "Closing." 30 MSE 170 C, MSE 210 C