Stihl MSE 210 C-BQ Instruction Manual - Page 38
Motor Cooling, Storing the Machine, Checking and Replacing the, Chain Sprocket
View all Stihl MSE 210 C-BQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
9931BA010 KN 9931BA008 KN English Motor Cooling N Use a dry brush or similar tool to clean the cooling slots at regular intervals - see "Maintenance Chart". Storing the Machine For periods of 3 months or longer N Disconnect the plug from the wall outlet. N Remove the saw chain and guide bar, clean them and spray with corrosion inhibiting oil. N Thoroughly clean the machine, especially the cooling air inlets. N If you use a biological chain and bar lubricant, e.g. STIHL BioPlus, completely fill the chain oil tank. N Store the machine in a dry and secure location - out of the reach of children and other unauthorized persons. Checking and Replacing the Chain Sprocket N Disconnect the plug from the wall outlet. N Remove the chain sprocket cover, chain and guide bar. Replace the chain sprocket a a 1 2 1 7-tooth sprocket (MSE 210 C) 2 6-tooth sprocket with washer (MSE 170 C) - after using two saw chains or sooner - if the wear marks (a) are deeper than 0.02 in (0.5 mm) since this would reduce the life of the chain. Use a gauge (special accessory) to check the depth of the wear marks. It is best to use two saw chains in rotation with one sprocket. STIHL recommends the use of original STIHL sprockets to ensure correct operation of the chain brake. 36 MSE 170 C, MSE 210 C